Introduction:
When you think of cling film, your mind likely drifts toward its usual kitchen duties: wrapping leftovers, covering food for storage, or keeping your sandwiches fresh. However, this versatile household staple has a surprising range of uses beyond the kitchen, and one of the most unexpected places where it can come in handy is on your windows. Whether you’re looking to improve insulation, protect your windows, or simply reduce energy costs, cling film can serve as a temporary but effective solution. In this article, we’ll explore the benefits of using cling film on windows, along with step-by-step instructions on how to apply it, and offer some tips for maximizing its effectiveness.
Ingredients (Supplies Needed):
Cling film (plastic wrap) – Ensure it’s high-quality and durable.
Scissors – To cut the cling film to the desired size.
Spray bottle with water – To lightly mist the window for easier application.
Tape – Painter’s tape or any adhesive tape to secure the cling film in place.
Squeegee or flat edge – To smooth out any air bubbles and ensure a smooth surface.
Instructions:
Clean the Window Surface: Start by thoroughly cleaning the window you want to cover with cling film. Dust, dirt, and grease will prevent the cling film from sticking properly and could leave streaks. Use a gentle glass cleaner and wipe down the surface until it’s spotless.
Cut the Cling Film: Unroll a length of cling film that’s slightly larger than the dimensions of your window. The extra film will help ensure complete coverage, even if the window is a bit uneven. Use scissors to cut it to the desired size.
Mist the Window: Lightly mist the window with water using a spray bottle. This will help the cling film adhere better and make it easier to smooth out.
Apply the Cling Film: Starting at one edge of the window, carefully apply the cling film, pressing it gently against the glass. Slowly work your way across the entire surface, ensuring the cling film sticks evenly. The moisture will help the film adhere to the window without leaving too many wrinkles.
Smooth Out Air Bubbles: Once the cling film is applied, use a squeegee or a flat edge (like a credit card) to press out any air bubbles. Work from the center outward to remove excess air and ensure the film is smooth and wrinkle-free.
Secure the Edges: Once the cling film is in place and smooth, use tape to secure the edges of the cling film against the window frame. This will keep it from peeling off over time, especially in areas with heavy foot traffic or wind.
Check for Gaps: After installation, inspect the window for any gaps or areas where the cling film may not have adhered properly. If necessary, trim any excess film or reapply a small section to cover any gaps.
the rest on next page
ADVERTISEMENT
